Juki DDL 9000 C-FMS W/ Table and Motor.
Free Shipping No Tax outside S.C. Orders may be cancelled prior to shipping, Assy Table and Servo motor included.
Juki DDL-9000C-FMS
has the full speed range to 5000SPM, JUKI has digitalized the drive mechanism of the sewing machine which determines the “seam” quality.
JUKI launches the new “direct-drive, high-speed, lockstitch sewing system with automatic thread trimmer” DDL-9000CF.
This is the newest flagship lockstitch machine. Digitalized vertically- and horizontally-driven feed mechanism allows easy adjustment of settings such as the feed focus only on the operation panel according to the material to be sewn.
Thanks to the digitalization, Optimum adjustment values required to produce high-quality seams can be stored, on a material-by-material basis, in memory and can be reproduced with ease.
This is the newest flagship, fully digital type direct-drive, high-speed, lockstitch machine with an automatic thread trimmer.
Digitalized vertically- and horizontally-driven feed mechanism allows easy adjustment of settings such as the feed locus only on the operation panel according to the material to be sewn.
Thanks to the digitalization, optimum adjustment values required to produce high-quality seams can be stored, on a material-by-material basis, in memory and can be reproduced with ease.
For sewing plants
which produce diversified products using diversified materials, this feature is quite helpful to achieve stable seam quality.
• Application: medium-weight materials.
• Lubrication: semi-dry.
• Max. sewing speed: 5000 st / min.
• Max. stitch length: 5 mm.
• Lift of the presser foot: by hand: 5.5 mm, by knee: 15 mm, auto: (1st stage) 5.0. mm (0.1~8.5 mm), (2nd stage) 8.5 mm (8.5~13.5 mm).
• Standard needle: DBx1 – DBx5 (#11) #9.
- #18 (Nm 65.
- 110)DDL-9000C is the world’s first sewing machine which comes with a digital drive mechanism and facilitates data transfer through NFC technology.
- This model allows for numerical entry of key settings through the operation panel meaning many manual adjustments are no longer needed.
- For the DDL -9000CS (digital type) adjustment of the feed dog height, feed pitch and feed locus have been digitalized and are programmable.
- For the DDL-9000CF (full-digital type), adjustment not only of those mentioned above but also the presser foot pressure and needle thread tension have been digitalized.
- With this digitalization, optimum adjustment values required to produce high-quality seams can be stored on a material-by-material basis in the machine internal memory, or externally, and can be reproduced with ease.
Designed for Industry.
- To get the best seams on any given product, maintenance experts and skilled operators must finely adjust sewing machines using tools such as a screwdriver or manual leavers and dials. Adjustment of all lockstitch machines in the plant requires an enormous amount of time and it is impossible to have the adjustment values perfectly reproduced across all machines.
- DDL-9000C Series not only substantially reduces setup time but also reproduces adjustments exactly, meaning the machine is ideally suited to the material being sewn. In addition, once the best-suited settings are stored in memory they can be translated to other machines via USB or NFC connection. Vertically and horizontally-driven digital feed mechanism.
- Thanks to the world’s first vertically-driven digital feed mechanism, the feed dog height can be adjusted with ease in accordance to the material being sewn.
- Thanks to this digital feed mechanism thread trimming is carried out with the feed dog lowered which results in a stable remaining thread length. Also because the feed dog does not protrude above the throat plate when the sewing machine stops it avoids the material from being damaged by the feed dog.
-
Juki DDL 9000 C-FMS
Thread remaining on the material
- at the end of sewing as short as 3 mm
As well as the lowered feed dog, the groove cam system and the picker device are adopted to allow forcible release of the thread trimmer even if it locks.
- Thereby securing the appropriate needle thread length and achieving stable length of thread remaining on the material.
- Management, browsing and editing of data can be carried out via Android application.
- Data on sewing machine adjustments can be transferred to an Android tablet or phone via the Juki Smart App via NFC or micro USB. This allows all settings to be calibrate once and then replicated across all machines on one sewing line.
- The operation panel is also provided with a USB port for data storage, transfer and management; software updates can be carried out with ease using a USB thumb drive.
-
Custom functions
- can be programed to the hand switch
- The functions programed to the hand switches can be set through the operation panel.
- Since the reverse-feed stitching lever is provided as standard additional functions that will be needed the most can be set.
- 20 different functions (needle-up/down correction sewing, reverse-feed correction sewing, 1-time reverse-feed stitching cancellation function, etc.) can all be allocated to the hand switch.
- Highly convenient operation is ensured when functions that are used the most are easily accessible.
-
Other Key Benefits for the
Juki DDL 9000 C-FMS
Include:
- Needle-thread active tension (full digital type)
- The presser foot pressure can be digitally controlled (full digital type)
- 4.3-inch large LCD touch panel (full digital type)Computer-controlled Vertically and Horizontally-Driven Feed Mechanism.
- The world’s first feed mechanism which is driven both vertically and horizontally has been computerized. The feed mechanism changes its feed locus in accordance with the material.
- As a result, the optimum adjustments can be achieved only by setting data on the operation panel. Furthermore, the vertically-driven feed mechanism helps keep the length of the thread remaining on the material after thread trimming constant.Remaining thread at the end of sewing reduced to 3mm.
- A both-blade driven rotary knife system is adopted. the knife intersects with the thread to trim it just beneath the needle entry point.
- Since the knife ensures constant length of needle thread, the length of thread remaining on the material after thread trimming is, unlike thread trimming with the thread tensed, also constant.
-
Juki DDL 9000 C-FMS
- inherits JUKI’s thread trimming technology to allow the thread trimmer to start up as soon as the pedal is depressed. Sewing Machine management utilizing “IoT” (Internet of Things).
- Data adjusted in a sample-making workshop etc. can be transferred without contact to the sewing machines in your factory using your tablet. (USB port is provided as standard)Commitment to “seam quality’ is poised to enter a new era with JUKI ’s next-generation sewing system.
- The change is driven by digitalization. Until recently, sewing machines have been adjusted by human operators based on personal hunches and experience.
-
Now, with JUKI’s digital sewing system.
- DDL-9000C, sewing machine adjustments are fully digitalized. The settings can be reproduced with total accuracy to perfectlysuit the materials being sewn.
- Needle thread tension which matches sewing conditions given can be set on the operation panel and stored in memory.
- The needle thread tension adjustment needs experience. However, for this sewing machine, thread tension data stored in memory is reproducible, thereby reducing the setup time when the product to be sewn is changed.
- Example : Needle-thread active tension demonstrates its effectiveness in the top stitching process. For welting shoulders of a difficult-to-sew material, uniform stitches can be produced continuously by appropriately changing the sewing conditions even if the right and left material fabric differ in texture grain.
The Numbers.
Lift of the Presser Foot – Auto 15 mm.
Needle DBx1 (#11) #9 to #18 Capable
Feed Dog 4-row.
Hook Automatic-Lubricating Full-Rotary Hook.
Lubrication Automatic.
Lubricating Oil Juki Machine Oil 7 (Equivalent to ISO VG7).
Control Box Integrated.
Power Requirement Single-Phase 100.
- 240V, 3-phase requires 220 min line voltage.
- 120v is standard for USA unless consumer ask in note section for 220 V
Power Consumption 520VA.
-
Juki DDL 9000 C-FMS
Total Shipping Weight.
- – Assembled 240 lbs Juki DDL-9000C-F Safety Precautions Juki DDL-9000C-F Instruction Manual Juki DDL-9000C-F Parts List.
- Lubrication: Semi-dry.
- Max Sewing Speed: 5,000sti/min.
- Model: DDL-9000C-FMS.
- Type: Full Digital Type.
- Application: Medium-weight.
- itch Length: 5mm
- Needle: DB×1・DB×5(#11) #9~#18(Nm65~110)
-
Lift of the presser foot:
- –By hand: 5.5mm.
–By knee: 15mm, Auto: 1st stage 5.0mm(※0.1~8.5mm), 2nd stage 8.5mm(※8.5mm~13.5mm) - ※Adjustable on the operation panelModel Number Juki DDL-9000C-FMS.
- Application Medium-Weight.
- Lubrication Semi-Dry.
- Lubricating Oil JUKI Machine Oil 7 (equivalent to ISO VG7).
- Max. Sewing Speed 5,000 sti/min.
- Max. Stitch Length 5mm.
- Needle Bar Stroke 30.7mm.
- Feed Dog Height 0.8mm.
- Needle DBX1 (#11)#9.
- 18(NM65.
Key numbers
- Lift of the Presser foot By Hand: 5.5mm, By Knee: 15mm.
- Auto: First Step 5.0mm (0.1 -8.5mm).
- Second Step 8.5mm (8.5 13.5mm).
- Size of the Bed 517x178mm (distance from needto machine arm: 303mm).
- Bobbin Thread Winder Built-in the machine head.
- Machine Head Drive Compact AC Servomotor (450W) that is directly connected to the main shaft (direct-drive system).
- Automatic reverse feed function Provided as Standard.
- Power Consumption 520VA.
- Net Weight Machine Head: 40kg / 40.5kg (with AK-154), Control Box: 6Kg
- Outside dimensions of package (mm) 712x313x767(0.171m3).
Juki DDL 9000 C-FMS
Model Info.
MODEL | DDL-9000C-FMS | DDL-9000C-FSH | DDL-9000C-SMS | DDL-9000C-SSH |
---|---|---|---|---|
Type | Full Digital Type | Digital Type | ||
Application | Medium-weight | Heavy-weight | Medium-weight | Heavy-weight |
Lubrication | Semi-dry | Minute-quantity lubrication | Semi-dry | Minute-quantity lubrication |
Max. sewing speed | 5,000sti/min*1 | 4,500sti/min*2 | 5,000sti/min*1 | 4,500sti/min*2 |
Hand switch | Provided as standard (At the time of shipment: Hand switches are assigned respectively with the touch-back switch function and the one-touch changeover switch function.) | |||
Max. stitch length | 5mm | |||
Thread trimming method | Double-edge rotary system | |||
Needle bar stroke | 30.7mm | 35.0mm | 30.7mm | 35.0mm |
Feed dog height | 0.8mm | 1.2mm | 0.8mm | 1.2mm |
Needle thread tension | Active tension | Spring type | ||
Presser foot pressure | Electronic control | Spring type | ||
Needle*3 | DB×1・DB×5(#11 #9~18(Nm65~110) |
DB×1・DB×5(#21) #20~23(Nm125~160) |
DB×1・DB×5(#11) #9~18(Nm65~110) |
DB×1・DB×5(#21) #20~23(Nm125~160) |
Lift of the presser foot | By hand: 5.5mm, By knee: 15mm Auto: 1st stage 5.0 mm (*0.1~8.5mm), 2nd stage 8.5 mm (*8.5mm~13.5mm) * Adjustable on the operation panel | |||
Bobbin thread winder | Built in the top of machine head (provided with the bobbin thread retaining plate) | |||
Lubricating oil | JUKI New Defrix Oil No. 1 or JUKI CORPORATION GENUINE OIL 7 (equivalent to ISO VG7) | |||
Size of bed | 517×178mm(distance from needle to machine arm:303mm) | |||
Machine head drive | Compact AC servomotor (400W) that is directly connected to the main shaft (direct-drive system) | |||
Power consumption | 520VA | |||
Net weight | Machine head: 40.5kg(with AK-154) |